Cikakkiyar cibiya ta atomatik ƙananan injunan kera cakulan
- Yanayi:
- Sabuwa, Sabuwa
- Masana'antu masu dacewa:
- Kamfanin Abinci & Abin Sha
- Bayan Sabis na Garanti:
- Tallafin kan layi
- Wurin Sabis na Gida:
- Babu
- Wurin nuni:
- Babu
- Sunan Alama:
- LST
- Wurin Asalin:
- Sichuan, China
- Wutar lantarki:
- 380V/50HZ/Mataki uku
- Wutar (W):
- 24kw
- Girma (L*W*H):
- 18000*1500*1900mm
- Nauyi:
- 4000kg
- Takaddun shaida:
- CE
- Filin aikace-aikace:
- Kamfanin abinci na ciye-ciye
- Aikin injina:
- ajiya
- Albarkatun kasa:
- Kwayoyi, cakulan
- Fitar sunan samfurin:
- Cika cakulan
- Mabuɗin Siyarwa:
- Na atomatik
- Aikace-aikace:
- Chocolate
- Ana Ba da Sabis na Bayan-tallace-tallace:
- Akwai injiniyoyi don injinan sabis a ƙasashen waje
- Sunan samfur:
- cakulan masana'anta inji
- Injin da ya dace:
- Injin ajiye cakulan
- Amfani:
- cakulan / alewa / abinci gyare-gyare / ajiya
- Iyawa:
- 6-12 molds da min
- Kwamfuta:
- 0.4Mpa
- Siffa:
- 1D/2D/3D ajiya
- Launi:
- Kamar yadda bukatunku
- Garanti:
- shekara 1
Cikakkiyar cibiya ta atomatik ƙananan injunan kera cakulan
| Yawan aiki | Nozzles | Ƙarfi | Samar da iska | Tushen wutan lantarki | Cikakken nauyi | Girma |
| 8-18 molds/min | 48/72/96*2 | 22 kw | 4MP | Na musamman | 500kg | 4900-1680-1800mm |
Siffar Samfurin
Wannan layin ajiyan cakulan babban fasaha ne cikakken injin cakulan atomatik don gyare-gyaren cakulan.Tsarin samarwa ya haɗa da dumama ƙura, ajiyar cakulan, jijjiga mold, isar da ƙirar, sanyaya da rushewa.An yi amfani da wannan layin sosai wajen samar da cakulan tsantsa mai tsafta, cakulan cike da tsakiya, cakulan mai launi biyu, cakulan gauraye, cakulan biscuit, da sauransu.
Mafi mahimmancin fasalulluka na wannan layi shine sassauci kamar yadda kowane ɓangaren wannan layin za'a iya amfani dashi azaman sashi daban kuma a haɗa shi da wani injin.
Fasalolin sabon sigar
1.Depositor yana tare da harsashi, waɗannan harsashi ba kawai don manufar tsabta ba, amma har ma don kare lafiyar.
2.The depositing shugaban ne tare da gaba daya sabon inji, wanda sa azumi tara da kuma tarwatsa na depositing shugaban, depositing farantin, da dai sauransu Wannan zane sanya shi da sauri da kuma dace domin ajiya farantin canji ko ajiya tsaftacewa.
Bambanci tsakanin 2D da 3D Depositor
2D mai ajiya mai harbi daya:Mai ajiya mai harbi ɗaya, launi ɗaya, launuka biyu, cikon tsakiya, ƙwallon cakulan, ƙwallon cakulan cike da tsakiya, da sauransu.
3D mai ajiya mai ɗaukar hoto guda ɗaya:Yana da duk aikin 2D mai ajiya mai harbi guda ɗaya, ƙwararre a aikin yin ajiya.Mai ajiya yana iya motsawa zuwa kowace hanya da ake bukata.Har ma yana iya zana hoto.
Tsarin samarwa
CMould dumama-chocolate depositing-mould vibrating-mould isar da-cakulan sanyaya-mould vibrating
Kayayyakin suna nuna
Abokin hulɗa: Freya Yang
Imel:freya (a)chocolatequipment.netWayar hannu/Wechat/Whatsapp:0086-17761306430
